/
">BROCHURE
DAVINCI PELLETKACHELS
davinci
usermanual pdf
gebruiksaanwijzing
pdf nl
installatievoorbeelden davinci hidro
pelletkachels
DAVINCI-GEBRUIKSAANWIJZING
folder rvo subsidieaanvraag
functiedavincidisplay
TITAN
TRADING is reeds 4 jaar
importeur van Davinci pelletkachels,
kwaliteit kachels geproduceerd
door een
familie bedrijf in
Bulgarije met gerenomeerde
electronische componenten van de Italiaanse
fabrikant; Micronova. de kachels voldoen
aan de hoogste standaards
EN14785,EN303-5,EN13445 EN60335 EN50165.
TITAN TRADING geeft 2 jaar
garantie op fabrieksmankementen.
DAVINCI
cv pelletkachels staan
voor stijl.zijn makelijk te
bedienen,efficient en millieu vriendelijk
.Een millieu bewuste manier
om uw woning
te verwarmen.Bij de
design is speciaal
rekening gehouden dat een
groot mogelijke overdracht plaats
vindt tussen het vuur
en het water.Waardoor
neerslag van roet op het
vensterglas wordt vermeden en een
optimale werking van de ingebouwde warmtewisselaar
plaats vindt.De assamblage
geschiedt door hoog
gekwalificeerde vakmensen met gebruik van beproefde
Italiaanse componenten.Een Davinci cv
pelletkachel is een aanwinst voor ieder modern
interieur.
Voor
een stand alone
of nieuwe installatie kunnen de
Davinci pelletkachels
geleverd worden met
een optioneel ingebouwd cv set
/235 euro extra/ Wilt
u de Davinci cv pelletkachel
installeren in uw bestaande
cv installatie dan is
deze cv set
niet pertinent noodzakelijk.
kan echter wel dit
evt in overleg met uw
installateur.
DAVINCI
CV pelletkachels zijn
leverbaar in de
volgende vermogens;
14kw
verwarming voor
oppervlakten tot 140m2
18kw
verwarming tot oppervlakten tot 180m2
22kw
verwarming tot oppervlakten tot 220m2
25kw
verwarming tot oppervlakten tot 250m2
opptioneel
kunnen wij water/lucht warmte
wisselaars leveren hierdoor
is het mogelijk de
DAVINCI CV kachels ook te
gebruiken voor
verwarming met hetelucht bv
voor werkplaatsen garages.
voordeel is dat
u 1400 euro
subidie kunt krijgen
en normaal voor hetelucht
pelletkachels is dit
slechts 500 euro.
wij
leveren door heel
Nederland en Belgie.
contact
TITAN TRADING
0653327400
info@titantrading.nl
Davinci
dv140 in
showroom Vught
|
TITAN
TRADING is reeds 4 jaar
importeur van Davinci pelletkachels,
kwaliteit kachels geproduceerd
door een
familie bedrijf in
Bulgarije met gerenomeerde
electronische componenten van de Italiaanse
fabrikant; Micronova. de kachels voldoen
aan de hoogste standaards
EN14785,EN303-5,EN13445 EN60335 EN50165.
TITAN TRADING geeft 2 jaar
garantie op fabrieksmankementen.
DAVINCI
pelletkachels zijn
moderne Pelletkachels
ontworpen volgens
de
laatste Technische
innovaties voor
verwarmen met
houtpellets
.Bij
het ontwerp is
rekening gehouden met
het milieu
en de natuur.
Verder
stond het
gebruikers gemak van
de kachel op de
voorgrond.
De
moderne pelletkachel
verbrand hout pellets
optimaal.
Doordat
de specificatie van
de brandstof volgens geringere
toleranties
geproduceerd
wordt
dan in het
geval de
verwarming gebeurt
met normaal
hout waarbij
grote
verschillen kunnen
bestaan in
samenstelling en
vochtgehalte. gezien
de
hoge calorische waarde van hout pellets
en de
optimale gecontroleerde
verbranding
.wordt
een hoog rendement
verkregen,zodat met een
geringere hoeveelheid
brandstof
economisch
verwarmt kan worden.Door
de optimale
verbranding wordt er
slecht
een
kleine hoeveelheid
as geproduceerd .Ook
bevatten de
verbrandingsgassen
minder
giftige bestanddelen.alles
tezamen is het
verwarmen met hout pellets
een
verwerkingsmethode waarbij het
milieu gespaard
wordt. DAVINCI
zijn
moderne
Pelletkachels ontworpen
volgens de
laatste Technische
innovaties
voor
verwarmen met
houtpellets.Bij het ontwerp
is rekening gehouden
met
het milieu
en de natuur.Verder
stond het
gebruikers gemak van
de kachel
op
de voorgrond. De moderne
pelletkachel verbrand
hout pellets optimaal.
Doordat
de specificatie van
de brandstof volgens geringere
toleranties
geproduceerd
wordt dan in
het geval
de verwarming
gebeurt met
normaal
hout waarbij
grote verschillen
kunnen bestaan
in samenstelling
en
vochtgehalte. gezien de hoge calorische waarde van
hout pellets en
de optimale
gecontroleerde
verbranding .wordt een hoog
rendement verkregen,zodat met
een
geringere
hoeveelheid brandstof
economisch verwarmt kan
worden.Door de
optimale
verbranding
wordt er slecht
een kleine
hoeveelheid as
geproduceerd .Ook bevatten
de
verbrandingsgassen
minder giftige
bestanddelen.alles tezamen
is het
verwarmen met
hout pellets een
verwerkingsmethode waarbij het
milieu gespaard
wordt.
|
installatievoorbeelden davinci hidro
pelletkachels
GENERAL INFORMATION
Ecologie en
TECHNOLOGIE
- Geautomatiseerde verwarmen zonder de noodzaak van
voortdurende controle en verwarming in een vooraf bepaalde programma;
- Eeenvoudig aante passen
vermogen van de kachel.
- Elektronische
regeling van het verbrandingsproces;
- Schone verbranding
- Eenvoudig te reinigen en onderhoud;
- Vaste brandstof;
- De mogelijkheid voor economisch gebruik van de
brandstof door het optimaliseren van het verbrandingsproces;
- Sfeer
door zichtbare vlammen
The stove is designed for burning pellets in a small
percentage of pits and dried maize in a mixture with pellets.
Almost the entire part of the thermal power of the
fireplace is concentrated in the water jacket of the heating main
coolant-water. A too small part of power radiates from hearth. This
power through infrared radiation and convection can warm the room in
which the fireplace is located.
DESCRIPTION
Pellet stoves “DA VINCI” are
designed and manufactured according to the latest contemporary concepts
for heating with biomass, the utmost respect nature and the environment
and at the same time facilitating the user, given the high calorific
value per unit volume of fuel, its convenient transportation, the
minimum quantity of soot and ash in combustion and last but not least
– the separation of minimum quantities of harmful gases
during incineration and also environmentally sound production.
Pellet stoves “Da Vinci” provide
thermal comfort with minimal time for service. They are designed
primarily for use in urban environments, where porting and combustion
of wood or coal is inconvenient, cumbersome or polluting. The
combustion process runs automatically, without requiring continuous
surveillance and/or loading. Management and maintenance of the
combustion process is carried out with the help of embedded
microcomputer system supplied from the mains and consuming
insignificant amount of electricity.
Pellet stove “Da Vinci” is intended
for heating of family houses, apartments, offices, production halls and
other similar objects with heat losses from 5-25 kW.
The stove is a modern, high-efficiency and
environmentally sound means for burning pellets (pressed wood chips).
The heating system is with forced circulation of the heating water and
allows the use of both open and closed expansion tanks.
MODELS
Pellet stoves “Da Vinci” are
manufactured in three different with different power:
- DV 140 AIR (small-14 kW)
- DV 140 HIDRO (small-14 kW)
- DV 180 HIDRO (median-18 kW)
- DV 220 HIDRO (large-22 kW)
- DV 250 HIDRO (large-25 kW)
The two latest different have the same external
dimensions. The action and the way of management and use of the three
models is the same.
FUEL
The main fuel, which uses the stove, Pellet, but can
also be used dry pits, as well as dried corn. The pits and corn can be
burned in small relative amounts, up to a maximum of 15% of the mass of
the main fuel and mixed with it.
ELECTRONIC CONTROL SYSTEM
The process of burning is controlled using the built-in
electronic system.
At the top of the stove is located in command box to set
the current parameters of combustion and control of the combustion
process. The command box is part of the microcomputer system, control
of the stove.
Electronic management system consists of two blocks:
display, located in the rear part of the upper decorative lid Fireside
and managing block, which is located on the bottom base inside the
fireplace. The two units are connected to each other with the necessary
information and power lines.
The electronic system performs the following tasks:
- define, select and maintain the power of the stove;
- powered and operated motor for the venting of the
combustion chamber;
- powered, manage and monitor the correct operation of
the motor drive mechanism, screw conveyer;
- monitor certain internal temperatures in the stove
and when they exit outside the predefined tolerances generates
appropriate corrective actions;
- protecting and providing safety of shafts stove in
incorrect handling of user;
- submit appropriate messages in exceptional events
leading to errors in the work of the stove;
- provides a programming service of the combustion
process.
SETTINGS AND MODE OF OPERATION OF THE STOVE
The power of the stove can be changed in nine grades
ranging from 1 to 9. Each level of power is associated with a flow of
air that ventilates the combustion chamber, the low rate is that in 1st
grade, and the highest in 9th grade. Provision of prescribed flow-rate
is accomplished by changing the speed of rotation or the power of the
drive motor.
In order to achieve a power of the stove, it is
necessary to burn a certain amount of pellets per unit time. The
increase in power is achieved by increasing the quantity of fuel
supplied. The fuel is fed through the periodic rotation of the screw
mechanism that transports the pellets from the hopper to the combustion
chamber.
The Auger is driven by electric motor with reducer.
Operation of the engine is periodic, with two phases: stroke and pause.
The move is depending on the degree to which working stove. The power
is changed by changing the time during which work the Auger mechanism.
This program can be adjusted for an unlimited number of times on
request, with a view to optimizing the process. The experience and
knowledge of the manufacturer indicated that the optimal ratio of
capacity between the 1st and 9th grade moves from 1: 5 to 1: 6, which
in most cases is completely satisfactory. The construction of the stove
allows the receipt of greater ratio (up to about 1: 7), but it is tied
to the quality of the pellets.
The command box is located at the rear of the top
decorative plate on the stove. Its purpose is to implement the
switching on and off of the stove, start and stop the burning process,
setting up and management of all the functions, as well as servicing of
the stove.
ECONOMY, SAFETY AND SECURITY
The electronic system is designed to work with the
minimum possible cost of electricity using modern element base and
cutting-edge technical solutions. Thus is the stove adds to the energy
saving systems and apparatuses.
The electronic system is designed so that it can ensure
the trouble-free continuous work of the stove on 24 hours a day within
the heating season – 6 months.
When the network voltage operation of the stove is
suspended, if it is not equipped with a cigarette lighter and a weekly
programmer. If the network voltage is established the stove in
position. To recommence its work must be lighted again.
Dependence on the presence of mains voltage is an
advantage in terms of safety of operation. Since dropping the network
voltage circulation pump in the heating Highway stops operating if the
stove continue to work, would have created the conditions for
overheating of the water in the water jacket and repeatedly increasing
pressure due to the steam phase. In this sense, the dependence of the
network and the suspension of work in the absence of mains voltage can
be regarded as a defensive feature of the stove.
The system provides the required custom
features-measuring, set, monitor and maintain the desired temperature
in heated premises, able to compile user programs for work of the stove
at the power level or the value of the temperature in the day time
zones, and also for the current week.
|
MODEL |
|
|
|
|
PARAMETER////
MODEL: |
DV
140
AIR |
DV
140
HIDRO |
DV
180
HIDRO |
DV
220
HIDRO |
DV
250
HIDRO |
Maximum
value of the effective rated output
Rmax (grade 5) – a water jacket/Home |
14/
1 kW |
14/
1 kW |
18/
1 kW |
22/
1 kW |
25/
1 kW |
Maximum
constructive regulating ratio Pmax/Pmin (grade 9-grade 1) |
1: 6 |
Minimum
temperature of the water |
– |
30
± 2°Ñ |
30
± 2°Ñ |
30
± 2°Ñ |
30
± 2°Ñ |
Maximum
temperature of the water |
– |
80
± 2°Ñ |
80
± 2°Ñ |
80
± 2°Ñ |
80
± 2°Ñ |
Temperature
of the water in which the electronic protection excludes
unconditionally stove |
– |
87
± 2°Ñ |
87
± 2°Ñ |
87
± 2°Ñ |
87
± 2°Ñ |
Quantity
of water in the water shirt |
– |
20
dm³ |
26
dm³ |
30
dm³ |
30
dm³ |
Maximum
working pressure in the water shirt |
– |
2
bar |
2
bar |
2
bar |
2
bar |
Width
of the stove |
55
cm |
55
cm |
58
cm |
58
cm |
58
cm |
Height
of the stove |
95
cm |
95
cm |
100
cm |
100
cm |
100
cm |
Depth
of the stove |
60
cm |
60
cm |
66
cm |
66
cm |
66
cm |
Weight
of the stove |
70
kg |
90
kg |
105
kg |
120
kg |
140
kg |
Fuel
consumption |
0,7
÷ 3.2 kg/hour |
0,7
÷ 3.2 kg/hour |
0,7
÷ 4.0 kg/hour |
0,7
÷ 4.6 kg/hour |
0,7
÷ 5.2 kg/hour |
The
diameter of the smoke flue shall be checked |
80 mm |
The
amount of pre-accession nozzles |
1 “ |
Minimum
draught of the chimney |
15 Pa |
Volume
of ashes |
1 dm³ |
Supply
voltage |
~ 220V ± 10% |
Consumed
electric power from the supply network |
100 W |
Class
of protection against defeat by electric current in BS 63/1-90 |
1 |
Level
of internal protection |
IP 21 |
Ondestaand ziet
u
enkele
fotos van de
optioneel te
bestellen cv
set bestaande
uit
circulatie pomp,
exspansievat en
veiligheids ventiel.