TITAN
TRADING is reeds 5 jaar importeur van Davinci pelletkachels, kwaliteit
kachels geproduceerd door een familie bedrijf in Bulgarije met
gerenomeerde electronische componenten van de Italiaanse fabrikant;
Micronova. de kachels voldoen aan de hoogste standaards
EN14785,EN303-5,EN13445 EN60335 EN50165. TITAN TRADING geeft 2 jaar
garantie op fabrieksmankementen.DAVINCI
Beschrijving
DAVINCI
cv pelletkachels staan
voor stijl.zijn makelijk te
bedienen,efficient en millieu vriendelijk
.Een millieu bewuste manier
om uw woning
te verwarmen.Bij de
design is speciaal
rekening gehouden dat een
groot mogelijke overdracht plaats
vindt tussen het vuur
en het water.Waardoor
neerslag van roet op het
vensterglas wordt vermeden en een
optimale werking van de ingebouwde warmtewisselaar
plaats vindt.De assemblage
geschiedt door hoog
gekwalificeerde vakmensen met gebruik van beproefde
Italiaanse componenten.Een Davinci cv
pelletkachel is een aanwinst voor ieder modern
interieur.
Voor een stand alone
of nieuwe installatie kunnen de
Davinci pelletkachels
geleverd worden met
een optioneel ingebouwd cv set
/235 euro extra/ Wilt
u de Davinci cv pelletkachel
installeren in uw bestaande
cv installatie dan is
deze cv set
niet pertinent noodzakelijk.
kan echter wel dit
evt in overleg met uw
installateur.
DAVINCI CV pelletkachels
zijn leverbaar in
de volgende vermogens;
14kw verwarming voor
oppervlakten tot 140m2
18kw verwarming tot oppervlakten tot 180m2
22kw verwarming tot oppervlakten tot 220m2
25kw verwarming tot oppervlakten tot 250m2
opptioneel kunnen wij
water/lucht warmte wisselaars leveren
hierdoor is het
mogelijk de DAVINCI CV kachels ook
te gebruiken voor
verwarming met hetelucht bv
voor werkplaatsen garages.
wij leveren door
heel Nederland
en Belgie. contact
TITAN TRADING 0653327400
info@titantrading.nl
zijn moderne Pelletkachels ontworpen volgens de
laatste Technische innovaties voor verwarmen met houtpellets.Bij het
ontwerp is rekening gehouden met het milieu en de natuur.Verder stond
het gebruikers gemak van de kachel op de voorgrond. De moderne
pelletkachel verbrand hout pellets optimaal. Doordat de specificatie
van de brandstof volgens geringere toleranties geproduceerd wordt dan
in het geval de verwarming gebeurt met normaal hout waarbij grote
verschillen kunnen bestaan in samenstelling en vochtgehalte.
* gezien de hoge calorische waarde van hout pellets en de
optimale gecontroleerde verbranding .wordt een hoog rendement
verkregen,zodat met een geringere hoeveelheid brandstof economisch
verwarmt kan worden. *Door de optimale verbranding wordt er slecht een
kleine hoeveelheid as geproduceerd . *Ook bevatten de
verbrandingsgassen minder giftige bestanddelen.alles tezamen is het
verwarmen met hout pellets een verwerkingsmethode waarbij het milieu
gespaard wordt. *Davinci pelletkachels zijn verkrijgbaar in de volgende
kleuren/zijpanelen wit, beige, bordeau, antraciet. Evt ook ceramische
afwerking geluids niveau ; minder dan 40db op 500mm voor een demovideo
click op de link naar onze webshop. Davinci Cv pelletkachels kunnen met
of zonder ingebouwd cv set geleverd worden. U kunt de kachel ook de
bestaande circulatiepomp laten aansturen. Titan trading import /export
/proftapes eindhoven/ magazijnen in eindhoven ,den bosch. Levering in
heel nederland ,belgie tel : ,0358080880 040-2120685
GENERAL INFORMATION
The stove is designed for burning pellets in a small percentage of pits
and dried maize in a mixture with pellets. Almost the entire part of
the thermal power of the fireplace is concentrated in the water jacket
of the heating main coolant-water. A too small part of power radiates
from hearth. This power through infrared radiation and convection can
warm the room in which the fireplace is located.
DESCRIPTION
Pellet stoves “DA VINCI” are designed and
manufactured according to the latest contemporary concepts for heating
with biomass, the utmost respect nature and the environment and at the
same time facilitating the user, given the high calorific value per
unit volume of fuel, its convenient transportation, the minimum
quantity of soot and ash in combustion and last but not least
– the separation of minimum quantities of harmful gases
during incineration and also environmentally sound production. Pellet
stoves “Da Vinci” provide thermal comfort with
minimal time for service. They are designed primarily for use in urban
environments, where porting and combustion of wood or coal is
inconvenient, cumbersome or polluting. The combustion process runs
automatically, without requiring continuous surveillance and/or
loading. Management and maintenance of the combustion process is
carried out with the help of embedded microcomputer system supplied
from the mains and consuming insignificant amount of electricity.
Pellet stove “Da Vinci” is intended for heating of
family houses, apartments, offices, production halls and other similar
objects with heat losses from 5-25 kW. The stove is a modern,
high-efficiency and environmentally sound means for burning pellets
(pressed wood chips). The heating system is with forced circulation of
the heating water and allows the use of both open and closed expansion
tanks.
MODELS
Pellet stoves “Da Vinci” are manufactured in three
different with different power:
DV 140 AIR (small-14 kW)
DV 140 HIDRO (small-14 kW)
DV 180 HIDRO (median-18 kW)
DV 220 HIDRO (large-22 kW)
DV 250 HIDRO (large-25 kW)
The two latest different have the same external dimensions. The action
and the way of management and use of the three models is the same.
FUEL
The main fuel, which uses the stove, Pellet, but can also be used dry
pits, as well as dried corn. The pits and corn can be burned in small
relative amounts, up to a maximum of 15% of the mass of the main fuel
and mixed with it.
ELECTRONIC CONTROL SYSTEM
The process of burning is controlled using the built-in electronic
system. At the top of the stove is located in command box to set the
current parameters of combustion and control of the combustion process.
The command box is part of the microcomputer system, control of the
stove. Electronic management system consists of two blocks: display,
located in the rear part of the upper decorative lid Fireside and
managing block, which is located on the bottom base inside the
fireplace. The two units are connected to each other with the necessary
information and power lines. The electronic system performs the
following tasks:
define, select and maintain the power of the stove;
powered and operated motor for the venting of the
combustion chamber;
powered, manage and monitor the correct operation of
the motor drive mechanism, screw conveyer;
monitor certain internal temperatures in the stove
and when they exit outside the predefined tolerances generates
appropriate corrective actions;
protecting and providing safety of shafts stove in
incorrect handling of user;
submit appropriate messages in exceptional events
leading to errors in the work of the stove;
provides a programming service of the combustion
process.
SETTINGS AND MODE OF OPERATION OF THE STOVE
The power of the stove can be changed in nine grades ranging from 1 to
9. Each level of power is associated with a flow of air that ventilates
the combustion chamber, the low rate is that in 1st grade, and the
highest in 9th grade. Provision of prescribed flow-rate is accomplished
by changing the speed of rotation or the power of the drive motor. In
order to achieve a power of the stove, it is necessary to burn a
certain amount of pellets per unit time. The increase in power is
achieved by increasing the quantity of fuel supplied. The fuel is fed
through the periodic rotation of the screw mechanism that transports
the pellets from the hopper to the combustion chamber. The Auger is
driven by electric motor with reducer. Operation of the engine is
periodic, with two phases: stroke and pause. The move is depending on
the degree to which working stove. The power is changed by changing the
time during which work the Auger mechanism. This program can be
adjusted for an unlimited number of times on request, with a view to
optimizing the process. The experience and knowledge of the
manufacturer indicated that the optimal ratio of capacity between the
1st and 9th grade moves from 1: 5 to 1: 6, which in most cases is
completely satisfactory. The construction of the stove allows the
receipt of greater ratio (up to about 1: 7), but it is tied to the
quality of the pellets. The command box is located at the rear of the
top decorative plate on the stove. Its purpose is to implement the
switching on and off of the stove, start and stop the burning process,
setting up and management of all the functions, as well as servicing of
the stove.
ECONOMY, SAFETY AND SECURITY
The electronic system is designed to work with the minimum possible
cost of electricity using modern element base and cutting-edge
technical solutions. Thus is the stove adds to the energy saving
systems and apparatuses. The electronic system is designed so that it
can ensure the trouble-free continuous work of the stove on 24 hours a
day within the heating season – 6 months. When the network
voltage operation of the stove is suspended, if it is not equipped with
a cigarette lighter and a weekly programmer. If the network voltage is
established the stove in position. To recommence its work must be
lighted again. Dependence on the presence of mains voltage is an
advantage in terms of safety of operation. Since dropping the network
voltage circulation pump in the heating Highway stops operating if the
stove continue to work, would have created the conditions for
overheating of the water in the water jacket and repeatedly increasing
pressure due to the steam phase. In this sense, the dependence of the
network and the suspension of work in the absence of mains voltage can
be regarded as a defensive feature of the stove.
The system provides
the required custom features-measuring, set, monitor and maintain the
desired temperature in heated premises, able to compile user programs
for work of the stove at the power level or the value of the
temperature in the day time zones, and also for the current week.
MODEL
PARAMETER////
MODEL:
DV
140AIR
DV
140HIDRO
DV
180HIDRO
DV
220HIDRO
DV
250HIDRO
Maximum
value of the effective rated outputRmax (grade 5) – a water
jacket/Home
14/
1 kW
14/
1 kW
18/
1 kW
22/
1 kW
25/
1 kW
Maximum
constructive regulating ratio Pmax/Pmin (grade 9-grade 1)
1:
6
Minimum
temperature of the water
–
30
± 2°Ñ
30
± 2°Ñ
30
± 2°Ñ
30
± 2°Ñ
Maximum
temperature of the water
–
80
± 2°Ñ
80
± 2°Ñ
80
± 2°Ñ
80
± 2°Ñ
Temperature
of the water in which the electronic protection excludes
unconditionally stove
–
87
± 2°Ñ
87
± 2°Ñ
87
± 2°Ñ
87
± 2°Ñ
Quantity
of water in the water shirt
–
20
dm³
26
dm³
30
dm³
30
dm³
Maximum
working pressure in the water shirt
–
2
bar
2
bar
2
bar
2
bar
Width
of the stove
55
cm
55
cm
58
cm
58
cm
58
cm
Height
of the stove
95
cm
95
cm
100
cm
100
cm
100
cm
Depth
of the stove
60
cm
60
cm
66
cm
66
cm
66
cm
Weight
of the stove
70
kg
90
kg
105
kg
120
kg
140
kg
Fuel
consumption
0,7
÷ 3.2 kg/hour
0,7
÷ 3.2 kg/hour
0,7
÷ 4.0 kg/hour
0,7
÷ 4.6 kg/hour
0,7
÷ 5.2 kg/hour
The
diameter of the smoke flue shall be checked
80
mm
The
amount of pre-accession nozzles
1
“
Minimum
draught of the chimney
15
Pa
Volume
of ashes
1
dm³
Supply
voltage
~
220V ± 10%
Consumed
electric power from the supply network
100
W
Class
of protection against defeat by electric current in BS 63/1-90
medical supplies
KARMEK ONE Pelletkachels
